Gecko [ sachasauda.akalacademy.ac.in ]

Name	Size	Permission
Demo	[ DIR ]	drwxr-xr-x
Doc	[ DIR ]	drwxr-xr-x
Tools	[ DIR ]	drwxr-xr-x
bsddb	[ DIR ]	drwxr-xr-x
compiler	[ DIR ]	drwxr-xr-x
config	[ DIR ]	drwxr-xr-x
ctypes	[ DIR ]	drwxr-xr-x
curses	[ DIR ]	drwxr-xr-x
distutils	[ DIR ]	drwxr-xr-x
email	[ DIR ]	drwxr-xr-x
encodings	[ DIR ]	drwxr-xr-x
hotshot	[ DIR ]	drwxr-xr-x
idlelib	[ DIR ]	drwxr-xr-x
importlib	[ DIR ]	drwxr-xr-x
json	[ DIR ]	drwxr-xr-x
lib-dynload	[ DIR ]	drwxr-xr-x
lib-tk	[ DIR ]	drwxr-xr-x
lib2to3	[ DIR ]	drwxr-xr-x
logging	[ DIR ]	drwxr-xr-x
multiprocessing	[ DIR ]	drwxr-xr-x
plat-linux2	[ DIR ]	drwxr-xr-x
pydoc_data	[ DIR ]	drwxr-xr-x
site-packages	[ DIR ]	drwxr-xr-x
sqlite3	[ DIR ]	drwxr-xr-x
test	[ DIR ]	drwxr-xr-x
unittest	[ DIR ]	drwxr-xr-x
wsgiref	[ DIR ]	drwxr-xr-x
xml	[ DIR ]	drwxr-xr-x
BaseHTTPServer.py	21.93 KB	-rw-r--r--
BaseHTTPServer.pyc	21.18 KB	-rw-r--r--
BaseHTTPServer.pyo	21.18 KB	-rw-r--r--
Bastion.py	5.61 KB	-rw-r--r--
Bastion.pyc	6.5 KB	-rw-r--r--
Bastion.pyo	6.5 KB	-rw-r--r--
CGIHTTPServer.py	12.84 KB	-rw-r--r--
CGIHTTPServer.pyc	10.84 KB	-rw-r--r--
CGIHTTPServer.pyo	10.84 KB	-rw-r--r--
ConfigParser.py	27.1 KB	-rw-r--r--
ConfigParser.pyc	24.62 KB	-rw-r--r--
ConfigParser.pyo	24.62 KB	-rw-r--r--
Cookie.py	24.66 KB	-rw-r--r--
Cookie.pyc	21.64 KB	-rw-r--r--
Cookie.pyo	21.64 KB	-rw-r--r--
DocXMLRPCServer.py	10.52 KB	-rw-r--r--
DocXMLRPCServer.pyc	9.96 KB	-rw-r--r--
DocXMLRPCServer.pyo	9.85 KB	-rw-r--r--
HTMLParser.py	16.58 KB	-rw-r--r--
HTMLParser.pyc	13.39 KB	-rw-r--r--
HTMLParser.pyo	13.1 KB	-rw-r--r--
MimeWriter.py	6.33 KB	-rw-r--r--
MimeWriter.pyc	7.19 KB	-rw-r--r--
MimeWriter.pyo	7.19 KB	-rw-r--r--
Queue.py	8.36 KB	-rw-r--r--
Queue.pyc	9.19 KB	-rw-r--r--
Queue.pyo	9.19 KB	-rw-r--r--
SimpleHTTPServer.py	7.25 KB	-rw-r--r--
SimpleHTTPServer.pyc	7.55 KB	-rw-r--r--
SimpleHTTPServer.pyo	7.55 KB	-rw-r--r--
SimpleXMLRPCServer.py	25.17 KB	-rw-r--r--
SimpleXMLRPCServer.pyc	22.31 KB	-rw-r--r--
SimpleXMLRPCServer.pyo	22.31 KB	-rw-r--r--
SocketServer.py	23.29 KB	-rw-r--r--
SocketServer.pyc	23.49 KB	-rw-r--r--
SocketServer.pyo	23.49 KB	-rw-r--r--
StringIO.py	10.41 KB	-rw-r--r--
StringIO.pyc	11.21 KB	-rw-r--r--
StringIO.pyo	11.21 KB	-rw-r--r--
UserDict.py	5.67 KB	-rw-r--r--
UserDict.pyc	8.61 KB	-rw-r--r--
UserDict.pyo	8.61 KB	-rw-r--r--
UserList.py	3.56 KB	-rw-r--r--
UserList.pyc	6.42 KB	-rw-r--r--
UserList.pyo	6.42 KB	-rw-r--r--
UserString.py	9.46 KB	-rwxr-xr-x
UserString.pyc	14.52 KB	-rw-r--r--
UserString.pyo	14.52 KB	-rw-r--r--
_LWPCookieJar.py	6.4 KB	-rw-r--r--
_LWPCookieJar.pyc	5.4 KB	-rw-r--r--
_LWPCookieJar.pyo	5.4 KB	-rw-r--r--
_MozillaCookieJar.py	5.67 KB	-rw-r--r--
_MozillaCookieJar.pyc	4.37 KB	-rw-r--r--
_MozillaCookieJar.pyo	4.33 KB	-rw-r--r--
__future__.py	4.28 KB	-rw-r--r--
__future__.pyc	4.13 KB	-rw-r--r--
__future__.pyo	4.13 KB	-rw-r--r--
__phello__.foo.py	64 B	-rw-r--r--
__phello__.foo.pyc	125 B	-rw-r--r--
__phello__.foo.pyo	125 B	-rw-r--r--
_abcoll.py	17.45 KB	-rw-r--r--
_abcoll.pyc	24.4 KB	-rw-r--r--
_abcoll.pyo	24.4 KB	-rw-r--r--
_osx_support.py	18.03 KB	-rw-r--r--
_osx_support.pyc	11.28 KB	-rw-r--r--
_osx_support.pyo	11.28 KB	-rw-r--r--
_pyio.py	67.24 KB	-rw-r--r--
_pyio.pyc	62.71 KB	-rw-r--r--
_pyio.pyo	62.71 KB	-rw-r--r--
_strptime.py	19.75 KB	-rw-r--r--
_strptime.pyc	14.53 KB	-rw-r--r--
_strptime.pyo	14.53 KB	-rw-r--r--
_sysconfigdata.py	17.56 KB	-rw-r--r--
_sysconfigdata.pyc	20.72 KB	-rw-r--r--
_sysconfigdata.pyo	20.72 KB	-rw-r--r--
_threading_local.py	7.28 KB	-rw-r--r--
_threading_local.pyc	6.45 KB	-rw-r--r--
_threading_local.pyo	6.45 KB	-rw-r--r--
_weakrefset.py	5.48 KB	-rw-r--r--
_weakrefset.pyc	9.25 KB	-rw-r--r--
_weakrefset.pyo	9.25 KB	-rw-r--r--
abc.py	6.98 KB	-rw-r--r--
abc.pyc	6 KB	-rw-r--r--
abc.pyo	5.94 KB	-rw-r--r--
aifc.py	32.94 KB	-rw-r--r--
aifc.pyc	29.31 KB	-rw-r--r--
aifc.pyo	29.31 KB	-rw-r--r--
antigravity.py	60 B	-rw-r--r--
antigravity.pyc	203 B	-rw-r--r--
antigravity.pyo	203 B	-rw-r--r--
anydbm.py	2.6 KB	-rw-r--r--
anydbm.pyc	2.73 KB	-rw-r--r--
anydbm.pyo	2.73 KB	-rw-r--r--
argparse.py	86.46 KB	-rw-r--r--
argparse.pyc	62.57 KB	-rw-r--r--
argparse.pyo	62.41 KB	-rw-r--r--
ast.py	11.53 KB	-rw-r--r--
ast.pyc	12.65 KB	-rw-r--r--
ast.pyo	12.65 KB	-rw-r--r--
asynchat.py	11.13 KB	-rw-r--r--
asynchat.pyc	8.44 KB	-rw-r--r--
asynchat.pyo	8.44 KB	-rw-r--r--
asyncore.py	20.36 KB	-rw-r--r--
asyncore.pyc	18.4 KB	-rw-r--r--
asyncore.pyo	18.4 KB	-rw-r--r--
atexit.py	1.67 KB	-rw-r--r--
atexit.pyc	2.15 KB	-rw-r--r--
atexit.pyo	2.15 KB	-rw-r--r--
audiodev.py	7.42 KB	-rw-r--r--
audiodev.pyc	8.27 KB	-rw-r--r--
audiodev.pyo	8.27 KB	-rw-r--r--
base64.py	11.09 KB	-rwxr-xr-x
base64.pyc	10.63 KB	-rw-r--r--
base64.pyo	10.63 KB	-rw-r--r--
bdb.py	21.21 KB	-rw-r--r--
bdb.pyc	18.65 KB	-rw-r--r--
bdb.pyo	18.65 KB	-rw-r--r--
binhex.py	14.14 KB	-rw-r--r--
binhex.pyc	15.04 KB	-rw-r--r--
binhex.pyo	15.04 KB	-rw-r--r--
bisect.py	2.53 KB	-rw-r--r--
bisect.pyc	3 KB	-rw-r--r--
bisect.pyo	3 KB	-rw-r--r--
cProfile.py	6.43 KB	-rwxr-xr-x
cProfile.pyc	6.25 KB	-rw-r--r--
cProfile.pyo	6.25 KB	-rw-r--r--
calendar.py	22.76 KB	-rw-r--r--
calendar.pyc	27.13 KB	-rw-r--r--
calendar.pyo	27.13 KB	-rw-r--r--
cgi.py	33.68 KB	-rwxr-xr-x
cgi.pyc	31.71 KB	-rw-r--r--
cgi.pyo	31.71 KB	-rw-r--r--
cgitb.py	11.89 KB	-rw-r--r--
cgitb.pyc	11.9 KB	-rw-r--r--
cgitb.pyo	11.9 KB	-rw-r--r--
chunk.py	5.25 KB	-rw-r--r--
chunk.pyc	5.46 KB	-rw-r--r--
chunk.pyo	5.46 KB	-rw-r--r--
cmd.py	14.67 KB	-rw-r--r--
cmd.pyc	13.71 KB	-rw-r--r--
cmd.pyo	13.71 KB	-rw-r--r--
code.py	9.95 KB	-rw-r--r--
code.pyc	10.09 KB	-rw-r--r--
code.pyo	10.09 KB	-rw-r--r--
codecs.py	34.44 KB	-rw-r--r--
codecs.pyc	35.74 KB	-rw-r--r--
codecs.pyo	35.74 KB	-rw-r--r--
codeop.py	5.86 KB	-rw-r--r--
codeop.pyc	6.44 KB	-rw-r--r--
codeop.pyo	6.44 KB	-rw-r--r--
collections.py	25.28 KB	-rw-r--r--
collections.pyc	23.99 KB	-rw-r--r--
collections.pyo	23.94 KB	-rw-r--r--
colorsys.py	3.6 KB	-rw-r--r--
colorsys.pyc	3.9 KB	-rw-r--r--
colorsys.pyo	3.9 KB	-rw-r--r--
commands.py	2.49 KB	-rw-r--r--
commands.pyc	2.41 KB	-rw-r--r--
commands.pyo	2.41 KB	-rw-r--r--
compileall.py	7.58 KB	-rw-r--r--
compileall.pyc	6.85 KB	-rw-r--r--
compileall.pyo	6.85 KB	-rw-r--r--
contextlib.py	4.32 KB	-rw-r--r--
contextlib.pyc	4.35 KB	-rw-r--r--
contextlib.pyo	4.35 KB	-rw-r--r--
cookielib.py	63.21 KB	-rw-r--r--
cookielib.pyc	53.55 KB	-rw-r--r--
cookielib.pyo	53.37 KB	-rw-r--r--
copy.py	11.25 KB	-rw-r--r--
copy.pyc	11.91 KB	-rw-r--r--
copy.pyo	11.82 KB	-rw-r--r--
copy_reg.py	6.64 KB	-rw-r--r--
copy_reg.pyc	4.99 KB	-rw-r--r--
copy_reg.pyo	4.95 KB	-rw-r--r--
crypt.py	2.24 KB	-rw-r--r--
crypt.pyc	2.89 KB	-rw-r--r--
crypt.pyo	2.89 KB	-rw-r--r--
csv.py	15.96 KB	-rw-r--r--
csv.pyc	13.14 KB	-rw-r--r--
csv.pyo	13.14 KB	-rw-r--r--
dbhash.py	498 B	-rw-r--r--
dbhash.pyc	718 B	-rw-r--r--
dbhash.pyo	718 B	-rw-r--r--
decimal.py	215.84 KB	-rw-r--r--
decimal.pyc	167.33 KB	-rw-r--r--
decimal.pyo	167.33 KB	-rw-r--r--
difflib.py	80.42 KB	-rw-r--r--
difflib.pyc	60.5 KB	-rw-r--r--
difflib.pyo	60.45 KB	-rw-r--r--
dircache.py	1.1 KB	-rw-r--r--
dircache.pyc	1.54 KB	-rw-r--r--
dircache.pyo	1.54 KB	-rw-r--r--
dis.py	6.35 KB	-rw-r--r--
dis.pyc	6.08 KB	-rw-r--r--
dis.pyo	6.08 KB	-rw-r--r--
doctest.py	102.01 KB	-rw-r--r--
doctest.pyc	81.45 KB	-rw-r--r--
doctest.pyo	81.17 KB	-rw-r--r--
dumbdbm.py	8.61 KB	-rw-r--r--
dumbdbm.pyc	6.41 KB	-rw-r--r--
dumbdbm.pyo	6.41 KB	-rw-r--r--
dummy_thread.py	4.31 KB	-rw-r--r--
dummy_thread.pyc	5.27 KB	-rw-r--r--
dummy_thread.pyo	5.27 KB	-rw-r--r--
dummy_threading.py	2.74 KB	-rw-r--r--
dummy_threading.pyc	1.25 KB	-rw-r--r--
dummy_threading.pyo	1.25 KB	-rw-r--r--
filecmp.py	9.36 KB	-rw-r--r--
filecmp.pyc	9.4 KB	-rw-r--r--
filecmp.pyo	9.4 KB	-rw-r--r--
fileinput.py	13.81 KB	-rw-r--r--
fileinput.pyc	14.48 KB	-rw-r--r--
fileinput.pyo	14.48 KB	-rw-r--r--
fnmatch.py	3.16 KB	-rw-r--r--
fnmatch.pyc	3.45 KB	-rw-r--r--
fnmatch.pyo	3.45 KB	-rw-r--r--
formatter.py	14.56 KB	-rw-r--r--
formatter.pyc	18.73 KB	-rw-r--r--
formatter.pyo	18.73 KB	-rw-r--r--
fpformat.py	4.59 KB	-rw-r--r--
fpformat.pyc	4.56 KB	-rw-r--r--
fpformat.pyo	4.56 KB	-rw-r--r--
fractions.py	21.87 KB	-rw-r--r--
fractions.pyc	19.27 KB	-rw-r--r--
fractions.pyo	19.27 KB	-rw-r--r--
ftplib.py	36.1 KB	-rw-r--r--
ftplib.pyc	33.38 KB	-rw-r--r--
ftplib.pyo	33.38 KB	-rw-r--r--
functools.py	4.37 KB	-rw-r--r--
functools.pyc	5.95 KB	-rw-r--r--
functools.pyo	5.95 KB	-rw-r--r--
genericpath.py	2.94 KB	-rw-r--r--
genericpath.pyc	3.19 KB	-rw-r--r--
genericpath.pyo	3.19 KB	-rw-r--r--
getopt.py	7.15 KB	-rw-r--r--
getopt.pyc	6.5 KB	-rw-r--r--
getopt.pyo	6.45 KB	-rw-r--r--
getpass.py	5.43 KB	-rw-r--r--
getpass.pyc	4.63 KB	-rw-r--r--
getpass.pyo	4.63 KB	-rw-r--r--
gettext.py	19.47 KB	-rw-r--r--
gettext.pyc	15.19 KB	-rw-r--r--
gettext.pyo	15.19 KB	-rw-r--r--
glob.py	2.86 KB	-rw-r--r--
glob.pyc	2.83 KB	-rw-r--r--
glob.pyo	2.83 KB	-rw-r--r--
gzip.py	18.26 KB	-rw-r--r--
gzip.pyc	14.72 KB	-rw-r--r--
gzip.pyo	14.72 KB	-rw-r--r--
hashlib.py	7.48 KB	-rw-r--r--
hashlib.pyc	6.74 KB	-rw-r--r--
hashlib.pyo	6.74 KB	-rw-r--r--
heapq.py	17.76 KB	-rw-r--r--
heapq.pyc	14.13 KB	-rw-r--r--
heapq.pyo	14.13 KB	-rw-r--r--
hmac.py	4.48 KB	-rw-r--r--
hmac.pyc	4.44 KB	-rw-r--r--
hmac.pyo	4.44 KB	-rw-r--r--
htmlentitydefs.py	17.63 KB	-rw-r--r--
htmlentitydefs.pyc	6.22 KB	-rw-r--r--
htmlentitydefs.pyo	6.22 KB	-rw-r--r--
htmllib.py	12.57 KB	-rw-r--r--
htmllib.pyc	19.83 KB	-rw-r--r--
htmllib.pyo	19.83 KB	-rw-r--r--
httplib.py	51.37 KB	-rw-r--r--
httplib.pyc	37.54 KB	-rw-r--r--
httplib.pyo	37.37 KB	-rw-r--r--
ihooks.py	18.54 KB	-rw-r--r--
ihooks.pyc	20.87 KB	-rw-r--r--
ihooks.pyo	20.87 KB	-rw-r--r--
imaplib.py	47.14 KB	-rw-r--r--
imaplib.pyc	44.28 KB	-rw-r--r--
imaplib.pyo	41.63 KB	-rw-r--r--
imghdr.py	3.46 KB	-rw-r--r--
imghdr.pyc	4.73 KB	-rw-r--r--
imghdr.pyo	4.73 KB	-rw-r--r--
imputil.py	25.16 KB	-rw-r--r--
imputil.pyc	15.26 KB	-rw-r--r--
imputil.pyo	15.08 KB	-rw-r--r--
inspect.py	41.47 KB	-rw-r--r--
inspect.pyc	39.04 KB	-rw-r--r--
inspect.pyo	39.04 KB	-rw-r--r--
io.py	3.12 KB	-rw-r--r--
io.pyc	3.4 KB	-rw-r--r--
io.pyo	3.4 KB	-rw-r--r--
keyword.py	1.95 KB	-rwxr-xr-x
keyword.pyc	2.06 KB	-rw-r--r--
keyword.pyo	2.06 KB	-rw-r--r--
linecache.py	3.87 KB	-rw-r--r--
linecache.pyc	3.14 KB	-rw-r--r--
linecache.pyo	3.14 KB	-rw-r--r--
locale.py	87.33 KB	-rw-r--r--
locale.pyc	48.77 KB	-rw-r--r--
locale.pyo	48.77 KB	-rw-r--r--
macpath.py	6.11 KB	-rw-r--r--
macpath.pyc	7.47 KB	-rw-r--r--
macpath.pyo	7.47 KB	-rw-r--r--
macurl2path.py	3.2 KB	-rw-r--r--
macurl2path.pyc	2.71 KB	-rw-r--r--
macurl2path.pyo	2.71 KB	-rw-r--r--
mailbox.py	78.86 KB	-rw-r--r--
mailbox.pyc	74.87 KB	-rw-r--r--
mailbox.pyo	74.82 KB	-rw-r--r--
mailcap.py	7.25 KB	-rw-r--r--
mailcap.pyc	6.92 KB	-rw-r--r--
mailcap.pyo	6.92 KB	-rw-r--r--
markupbase.py	14.3 KB	-rw-r--r--
markupbase.pyc	9.08 KB	-rw-r--r--
markupbase.pyo	8.89 KB	-rw-r--r--
md5.py	358 B	-rw-r--r--
md5.pyc	378 B	-rw-r--r--
md5.pyo	378 B	-rw-r--r--
mhlib.py	32.65 KB	-rw-r--r--
mhlib.pyc	33.01 KB	-rw-r--r--
mhlib.pyo	33.01 KB	-rw-r--r--
mimetools.py	7 KB	-rw-r--r--
mimetools.pyc	8.03 KB	-rw-r--r--
mimetools.pyo	8.03 KB	-rw-r--r--
mimetypes.py	20.22 KB	-rw-r--r--
mimetypes.pyc	17.86 KB	-rw-r--r--
mimetypes.pyo	17.86 KB	-rw-r--r--
mimify.py	14.67 KB	-rwxr-xr-x
mimify.pyc	11.71 KB	-rw-r--r--
mimify.pyo	11.71 KB	-rw-r--r--
modulefinder.py	23.71 KB	-rw-r--r--
modulefinder.pyc	18.27 KB	-rw-r--r--
modulefinder.pyo	18.19 KB	-rw-r--r--
multifile.py	4.71 KB	-rw-r--r--
multifile.pyc	5.29 KB	-rw-r--r--
multifile.pyo	5.25 KB	-rw-r--r--
mutex.py	1.83 KB	-rw-r--r--
mutex.pyc	2.46 KB	-rw-r--r--
mutex.pyo	2.46 KB	-rw-r--r--
netrc.py	4.47 KB	-rw-r--r--
netrc.pyc	3.83 KB	-rw-r--r--
netrc.pyo	3.83 KB	-rw-r--r--
new.py	610 B	-rw-r--r--
new.pyc	862 B	-rw-r--r--
new.pyo	862 B	-rw-r--r--
nntplib.py	20.97 KB	-rw-r--r--
nntplib.pyc	20.55 KB	-rw-r--r--
nntplib.pyo	20.55 KB	-rw-r--r--
ntpath.py	18.02 KB	-rw-r--r--
ntpath.pyc	11.6 KB	-rw-r--r--
ntpath.pyo	11.56 KB	-rw-r--r--
nturl2path.py	2.32 KB	-rw-r--r--
nturl2path.pyc	1.77 KB	-rw-r--r--
nturl2path.pyo	1.77 KB	-rw-r--r--
numbers.py	10.08 KB	-rw-r--r--
numbers.pyc	13.68 KB	-rw-r--r--
numbers.pyo	13.68 KB	-rw-r--r--
opcode.py	5.35 KB	-rw-r--r--
opcode.pyc	6 KB	-rw-r--r--
opcode.pyo	6 KB	-rw-r--r--
optparse.py	59.69 KB	-rw-r--r--
optparse.pyc	52.78 KB	-rw-r--r--
optparse.pyo	52.7 KB	-rw-r--r--
os.py	25.17 KB	-rw-r--r--
os.pyc	24.96 KB	-rw-r--r--
os.pyo	24.96 KB	-rw-r--r--
os2emxpath.py	4.5 KB	-rw-r--r--
os2emxpath.pyc	4.39 KB	-rw-r--r--
os2emxpath.pyo	4.39 KB	-rw-r--r--
pdb.doc	7.73 KB	-rw-r--r--
pdb.py	44.94 KB	-rwxr-xr-x
pdb.pyc	42.59 KB	-rw-r--r--
pdb.pyo	42.59 KB	-rw-r--r--
pickle.py	44.09 KB	-rw-r--r--
pickle.pyc	37.56 KB	-rw-r--r--
pickle.pyo	37.37 KB	-rw-r--r--
pickletools.py	72.79 KB	-rw-r--r--
pickletools.pyc	55.77 KB	-rw-r--r--
pickletools.pyo	54.95 KB	-rw-r--r--
pipes.py	9.36 KB	-rw-r--r--
pipes.pyc	9.09 KB	-rw-r--r--
pipes.pyo	9.09 KB	-rw-r--r--
pkgutil.py	19.87 KB	-rw-r--r--
pkgutil.pyc	18.49 KB	-rw-r--r--
pkgutil.pyo	18.49 KB	-rw-r--r--
platform.py	51.97 KB	-rwxr-xr-x
platform.pyc	36.04 KB	-rw-r--r--
platform.pyo	36.04 KB	-rw-r--r--
plistlib.py	15.44 KB	-rw-r--r--
plistlib.pyc	19.52 KB	-rw-r--r--
plistlib.pyo	19.44 KB	-rw-r--r--
popen2.py	8.22 KB	-rw-r--r--
popen2.pyc	8.81 KB	-rw-r--r--
popen2.pyo	8.77 KB	-rw-r--r--
poplib.py	12.52 KB	-rw-r--r--
poplib.pyc	13.03 KB	-rw-r--r--
poplib.pyo	13.03 KB	-rw-r--r--
posixfile.py	7.82 KB	-rw-r--r--
posixfile.pyc	7.47 KB	-rw-r--r--
posixfile.pyo	7.47 KB	-rw-r--r--
posixpath.py	13.27 KB	-rw-r--r--
posixpath.pyc	11.03 KB	-rw-r--r--
posixpath.pyo	11.03 KB	-rw-r--r--
pprint.py	11.73 KB	-rw-r--r--
pprint.pyc	10.06 KB	-rw-r--r--
pprint.pyo	9.89 KB	-rw-r--r--
profile.py	22.25 KB	-rwxr-xr-x
profile.pyc	16.07 KB	-rw-r--r--
profile.pyo	15.83 KB	-rw-r--r--
pstats.py	26.08 KB	-rw-r--r--
pstats.pyc	24.43 KB	-rw-r--r--
pstats.pyo	24.43 KB	-rw-r--r--
pty.py	4.94 KB	-rw-r--r--
pty.pyc	4.85 KB	-rw-r--r--
pty.pyo	4.85 KB	-rw-r--r--
py_compile.py	5.79 KB	-rw-r--r--
py_compile.pyc	6.27 KB	-rw-r--r--
py_compile.pyo	6.27 KB	-rw-r--r--
pyclbr.py	13.07 KB	-rw-r--r--
pyclbr.pyc	9.42 KB	-rw-r--r--
pyclbr.pyo	9.42 KB	-rw-r--r--
pydoc.py	91.12 KB	-rwxr-xr-x
pydoc.pyc	88.35 KB	-rw-r--r--
pydoc.pyo	88.29 KB	-rw-r--r--
quopri.py	6.81 KB	-rwxr-xr-x
quopri.pyc	6.42 KB	-rw-r--r--
quopri.pyo	6.42 KB	-rw-r--r--
random.py	31.45 KB	-rw-r--r--
random.pyc	24.99 KB	-rw-r--r--
random.pyo	24.99 KB	-rw-r--r--
re.py	12.66 KB	-rw-r--r--
re.pyc	12.79 KB	-rw-r--r--
re.pyo	12.79 KB	-rw-r--r--
repr.py	4.2 KB	-rw-r--r--
repr.pyc	5.26 KB	-rw-r--r--
repr.pyo	5.26 KB	-rw-r--r--
rexec.py	19.68 KB	-rw-r--r--
rexec.pyc	23.58 KB	-rw-r--r--
rexec.pyo	23.58 KB	-rw-r--r--
rfc822.py	32.51 KB	-rw-r--r--
rfc822.pyc	31.05 KB	-rw-r--r--
rfc822.pyo	31.05 KB	-rw-r--r--
rlcompleter.py	5.68 KB	-rw-r--r--
rlcompleter.pyc	5.84 KB	-rw-r--r--
rlcompleter.pyo	5.84 KB	-rw-r--r--
robotparser.py	7.03 KB	-rw-r--r--
robotparser.pyc	7.7 KB	-rw-r--r--
robotparser.pyo	7.7 KB	-rw-r--r--
runpy.py	10.45 KB	-rw-r--r--
runpy.pyc	8.21 KB	-rw-r--r--
runpy.pyo	8.21 KB	-rw-r--r--
sched.py	4.97 KB	-rw-r--r--
sched.pyc	4.88 KB	-rw-r--r--
sched.pyo	4.88 KB	-rw-r--r--
sets.py	18.6 KB	-rw-r--r--
sets.pyc	16.5 KB	-rw-r--r--
sets.pyo	16.5 KB	-rw-r--r--
sgmllib.py	17.46 KB	-rw-r--r--
sgmllib.pyc	15.07 KB	-rw-r--r--
sgmllib.pyo	15.07 KB	-rw-r--r--
sha.py	393 B	-rw-r--r--
sha.pyc	421 B	-rw-r--r--
sha.pyo	421 B	-rw-r--r--
shelve.py	7.89 KB	-rw-r--r--
shelve.pyc	10.03 KB	-rw-r--r--
shelve.pyo	10.03 KB	-rw-r--r--
shlex.py	10.88 KB	-rw-r--r--
shlex.pyc	7.37 KB	-rw-r--r--
shlex.pyo	7.37 KB	-rw-r--r--
shutil.py	18.46 KB	-rw-r--r--
shutil.pyc	18.1 KB	-rw-r--r--
shutil.pyo	18.1 KB	-rw-r--r--
site.py	19.61 KB	-rw-r--r--
site.pyc	19.11 KB	-rw-r--r--
site.pyo	19.11 KB	-rw-r--r--
smtpd.py	18.11 KB	-rwxr-xr-x
smtpd.pyc	15.52 KB	-rw-r--r--
smtpd.pyo	15.52 KB	-rw-r--r--

Code Editor : smtplib.py

#! /usr/bin/env python

'''SMTP/ESMTP client class.

This should follow RFC 821 (SMTP), RFC 1869 (ESMTP), RFC 2554 (SMTP
Authentication) and RFC 2487 (Secure SMTP over TLS).

Notes:

Please remember, when doing ESMTP, that the names of the SMTP service
extensions are NOT the same thing as the option keywords for the RCPT
and MAIL commands!

Example:

>>> import smtplib
  >>> s=smtplib.SMTP("localhost")
  >>> print s.help()
  This is Sendmail version 8.8.4
  Topics:
      HELO    EHLO    MAIL    RCPT    DATA
      RSET    NOOP    QUIT    HELP    VRFY
      EXPN    VERB    ETRN    DSN
  For more info use "HELP <topic>".
  To report bugs in the implementation send email to
      sendmail-bugs@sendmail.org.
  For local information send email to Postmaster at your site.
  End of HELP info
  >>> s.putcmd("vrfy","someone@here")
  >>> s.getreply()
  (250, "Somebody OverHere <somebody@here.my.org>")
  >>> s.quit()
'''

# Author: The Dragon De Monsyne <dragondm@integral.org>
# ESMTP support, test code and doc fixes added by
#     Eric S. Raymond <esr@thyrsus.com>
# Better RFC 821 compliance (MAIL and RCPT, and CRLF in data)
#     by Carey Evans <c.evans@clear.net.nz>, for picky mail servers.
# RFC 2554 (authentication) support by Gerhard Haering <gerhard@bigfoot.de>.
#
# This was modified from the Python 1.5 library HTTP lib.

import socket
import re
import email.utils
import base64
import hmac
from email.base64mime import encode as encode_base64
from sys import stderr

__all__ = ["SMTPException", "SMTPServerDisconnected", "SMTPResponseException",
           "SMTPSenderRefused", "SMTPRecipientsRefused", "SMTPDataError",
           "SMTPConnectError", "SMTPHeloError", "SMTPAuthenticationError",
           "quoteaddr", "quotedata", "SMTP"]

SMTP_PORT = 25
SMTP_SSL_PORT = 465
CRLF = "\r\n"
_MAXLINE = 8192 # more than 8 times larger than RFC 821, 4.5.3

OLDSTYLE_AUTH = re.compile(r"auth=(.*)", re.I)

# Exception classes used by this module.
class SMTPException(Exception):
    """Base class for all exceptions raised by this module."""

class SMTPServerDisconnected(SMTPException):
    """Not connected to any SMTP server.

This exception is raised when the server unexpectedly disconnects,
    or when an attempt is made to use the SMTP instance before
    connecting it to a server.
    """

class SMTPResponseException(SMTPException):
    """Base class for all exceptions that include an SMTP error code.

These exceptions are generated in some instances when the SMTP
    server returns an error code.  The error code is stored in the
    `smtp_code' attribute of the error, and the `smtp_error' attribute
    is set to the error message.
    """

def __init__(self, code, msg):
        self.smtp_code = code
        self.smtp_error = msg
        self.args = (code, msg)

class SMTPSenderRefused(SMTPResponseException):
    """Sender address refused.

In addition to the attributes set by on all SMTPResponseException
    exceptions, this sets `sender' to the string that the SMTP refused.
    """

def __init__(self, code, msg, sender):
        self.smtp_code = code
        self.smtp_error = msg
        self.sender = sender
        self.args = (code, msg, sender)

class SMTPRecipientsRefused(SMTPException):
    """All recipient addresses refused.

The errors for each recipient are accessible through the attribute
    'recipients', which is a dictionary of exactly the same sort as
    SMTP.sendmail() returns.
    """

def __init__(self, recipients):
        self.recipients = recipients
        self.args = (recipients,)

class SMTPDataError(SMTPResponseException):
    """The SMTP server didn't accept the data."""

class SMTPConnectError(SMTPResponseException):
    """Error during connection establishment."""

class SMTPHeloError(SMTPResponseException):
    """The server refused our HELO reply."""

class SMTPAuthenticationError(SMTPResponseException):
    """Authentication error.

Most probably the server didn't accept the username/password
    combination provided.
    """

def quoteaddr(addr):
    """Quote a subset of the email addresses defined by RFC 821.

Should be able to handle anything rfc822.parseaddr can handle.
    """
    m = (None, None)
    try:
        m = email.utils.parseaddr(addr)[1]
    except AttributeError:
        pass
    if m == (None, None):  # Indicates parse failure or AttributeError
        # something weird here.. punt -ddm
        return "<%s>" % addr
    elif m is None:
        # the sender wants an empty return address
        return "<>"
    else:
        return "<%s>" % m

def _addr_only(addrstring):
    displayname, addr = email.utils.parseaddr(addrstring)
    if (displayname, addr) == ('', ''):
        # parseaddr couldn't parse it, so use it as is.
        return addrstring
    return addr

def quotedata(data):
    """Quote data for email.

Double leading '.', and change Unix newline '\\n', or Mac '\\r' into
    Internet CRLF end-of-line.
    """
    return re.sub(r'(?m)^\.', '..',
        re.sub(r'(?:\r\n|\n|\r(?!\n))', CRLF, data))

try:
    import ssl
except ImportError:
    _have_ssl = False
else:
    class SSLFakeFile:
        """A fake file like object that really wraps a SSLObject.

It only supports what is needed in smtplib.
        """
        def __init__(self, sslobj):
            self.sslobj = sslobj

def readline(self, size=-1):
            if size < 0:
                size = None
            str = ""
            chr = None
            while chr != "\n":
                if size is not None and len(str) >= size:
                    break
                chr = self.sslobj.read(1)
                if not chr:
                    break
                str += chr
            return str

def close(self):
            pass

_have_ssl = True

class SMTP:
    """This class manages a connection to an SMTP or ESMTP server.
    SMTP Objects:
        SMTP objects have the following attributes:
            helo_resp
                This is the message given by the server in response to the
                most recent HELO command.

ehlo_resp
                This is the message given by the server in response to the
                most recent EHLO command. This is usually multiline.

does_esmtp
                This is a True value _after you do an EHLO command_, if the
                server supports ESMTP.

esmtp_features
                This is a dictionary, which, if the server supports ESMTP,
                will _after you do an EHLO command_, contain the names of the
                SMTP service extensions this server supports, and their
                parameters (if any).

Note, all extension names are mapped to lower case in the
                dictionary.

See each method's docstrings for details.  In general, there is a
        method of the same name to perform each SMTP command.  There is also a
        method called 'sendmail' that will do an entire mail transaction.
        """
    debuglevel = 0
    file = None
    helo_resp = None
    ehlo_msg = "ehlo"
    ehlo_resp = None
    does_esmtp = 0
    default_port = SMTP_PORT

def __init__(self, host='', port=0, local_hostname=None,
                 timeout=socket._GLOBAL_DEFAULT_TIMEOUT):
        """Initialize a new instance.

If specified, `host' is the name of the remote host to which to
        connect.  If specified, `port' specifies the port to which to connect.
        By default, smtplib.SMTP_PORT is used.  If a host is specified the
        connect method is called, and if it returns anything other than
        a success code an SMTPConnectError is raised.  If specified,
        `local_hostname` is used as the FQDN of the local host.  By default,
        the local hostname is found using socket.getfqdn().

"""
        self.timeout = timeout
        self.esmtp_features = {}
        if host:
            (code, msg) = self.connect(host, port)
            if code != 220:
                raise SMTPConnectError(code, msg)
        if local_hostname is not None:
            self.local_hostname = local_hostname
        else:
            # RFC 2821 says we should use the fqdn in the EHLO/HELO verb, and
            # if that can't be calculated, that we should use a domain literal
            # instead (essentially an encoded IP address like [A.B.C.D]).
            fqdn = socket.getfqdn()
            if '.' in fqdn:
                self.local_hostname = fqdn
            else:
                # We can't find an fqdn hostname, so use a domain literal
                addr = '127.0.0.1'
                try:
                    addr = socket.gethostbyname(socket.gethostname())
                except socket.gaierror:
                    pass
                self.local_hostname = '[%s]' % addr

def set_debuglevel(self, debuglevel):
        """Set the debug output level.

A non-false value results in debug messages for connection and for all
        messages sent to and received from the server.

"""
        self.debuglevel = debuglevel

def _get_socket(self, host, port, timeout):
        # This makes it simpler for SMTP_SSL to use the SMTP connect code
        # and just alter the socket connection bit.
        if self.debuglevel > 0:
            print>>stderr, 'connect:', (host, port)
        return socket.create_connection((host, port), timeout)

def connect(self, host='localhost', port=0):
        """Connect to a host on a given port.

If the hostname ends with a colon (`:') followed by a number, and
        there is no port specified, that suffix will be stripped off and the
        number interpreted as the port number to use.

Note: This method is automatically invoked by __init__, if a host is
        specified during instantiation.

"""
        if not port and (host.find(':') == host.rfind(':')):
            i = host.rfind(':')
            if i >= 0:
                host, port = host[:i], host[i + 1:]
                try:
                    port = int(port)
                except ValueError:
                    raise socket.error, "nonnumeric port"
        if not port:
            port = self.default_port
        if self.debuglevel > 0:
            print>>stderr, 'connect:', (host, port)
        self.sock = self._get_socket(host, port, self.timeout)
        (code, msg) = self.getreply()
        if self.debuglevel > 0:
            print>>stderr, "connect:", msg
        return (code, msg)

def send(self, str):
        """Send `str' to the server."""
        if self.debuglevel > 0:
            print>>stderr, 'send:', repr(str)
        if hasattr(self, 'sock') and self.sock:
            try:
                self.sock.sendall(str)
            except socket.error:
                self.close()
                raise SMTPServerDisconnected('Server not connected')
        else:
            raise SMTPServerDisconnected('please run connect() first')

def putcmd(self, cmd, args=""):
        """Send a command to the server."""
        if args == "":
            str = '%s%s' % (cmd, CRLF)
        else:
            str = '%s %s%s' % (cmd, args, CRLF)
        self.send(str)

def getreply(self):
        """Get a reply from the server.

Returns a tuple consisting of:

- server response code (e.g. '250', or such, if all goes well)
            Note: returns -1 if it can't read response code.

- server response string corresponding to response code (multiline
            responses are converted to a single, multiline string).

Raises SMTPServerDisconnected if end-of-file is reached.
        """
        resp = []
        if self.file is None:
            self.file = self.sock.makefile('rb')
        while 1:
            try:
                line = self.file.readline(_MAXLINE + 1)
            except socket.error as e:
                self.close()
                raise SMTPServerDisconnected("Connection unexpectedly closed: "
                                             + str(e))
            if line == '':
                self.close()
                raise SMTPServerDisconnected("Connection unexpectedly closed")
            if self.debuglevel > 0:
                print>>stderr, 'reply:', repr(line)
            if len(line) > _MAXLINE:
                raise SMTPResponseException(500, "Line too long.")
            resp.append(line[4:].strip())
            code = line[:3]
            # Check that the error code is syntactically correct.
            # Don't attempt to read a continuation line if it is broken.
            try:
                errcode = int(code)
            except ValueError:
                errcode = -1
                break
            # Check if multiline response.
            if line[3:4] != "-":
                break

errmsg = "\n".join(resp)
        if self.debuglevel > 0:
            print>>stderr, 'reply: retcode (%s); Msg: %s' % (errcode, errmsg)
        return errcode, errmsg

def docmd(self, cmd, args=""):
        """Send a command, and return its response code."""
        self.putcmd(cmd, args)
        return self.getreply()

# std smtp commands
    def helo(self, name=''):
        """SMTP 'helo' command.
        Hostname to send for this command defaults to the FQDN of the local
        host.
        """
        self.putcmd("helo", name or self.local_hostname)
        (code, msg) = self.getreply()
        self.helo_resp = msg
        return (code, msg)

def ehlo(self, name=''):
        """ SMTP 'ehlo' command.
        Hostname to send for this command defaults to the FQDN of the local
        host.
        """
        self.esmtp_features = {}
        self.putcmd(self.ehlo_msg, name or self.local_hostname)
        (code, msg) = self.getreply()
        # According to RFC1869 some (badly written)
        # MTA's will disconnect on an ehlo. Toss an exception if
        # that happens -ddm
        if code == -1 and len(msg) == 0:
            self.close()
            raise SMTPServerDisconnected("Server not connected")
        self.ehlo_resp = msg
        if code != 250:
            return (code, msg)
        self.does_esmtp = 1
        #parse the ehlo response -ddm
        resp = self.ehlo_resp.split('\n')
        del resp[0]
        for each in resp:
            # To be able to communicate with as many SMTP servers as possible,
            # we have to take the old-style auth advertisement into account,
            # because:
            # 1) Else our SMTP feature parser gets confused.
            # 2) There are some servers that only advertise the auth methods we
            #    support using the old style.
            auth_match = OLDSTYLE_AUTH.match(each)
            if auth_match:
                # This doesn't remove duplicates, but that's no problem
                self.esmtp_features["auth"] = self.esmtp_features.get("auth", "") \
                        + " " + auth_match.groups(0)[0]
                continue

# RFC 1869 requires a space between ehlo keyword and parameters.
            # It's actually stricter, in that only spaces are allowed between
            # parameters, but were not going to check for that here.  Note
            # that the space isn't present if there are no parameters.
            m = re.match(r'(?P<feature>[A-Za-z0-9][A-Za-z0-9\-]*) ?', each)
            if m:
                feature = m.group("feature").lower()
                params = m.string[m.end("feature"):].strip()
                if feature == "auth":
                    self.esmtp_features[feature] = self.esmtp_features.get(feature, "") \
                            + " " + params
                else:
                    self.esmtp_features[feature] = params
        return (code, msg)

def has_extn(self, opt):
        """Does the server support a given SMTP service extension?"""
        return opt.lower() in self.esmtp_features

def help(self, args=''):
        """SMTP 'help' command.
        Returns help text from server."""
        self.putcmd("help", args)
        return self.getreply()[1]

def rset(self):
        """SMTP 'rset' command -- resets session."""
        return self.docmd("rset")

def noop(self):
        """SMTP 'noop' command -- doesn't do anything :>"""
        return self.docmd("noop")

def mail(self, sender, options=[]):
        """SMTP 'mail' command -- begins mail xfer session."""
        optionlist = ''
        if options and self.does_esmtp:
            optionlist = ' ' + ' '.join(options)
        self.putcmd("mail", "FROM:%s%s" % (quoteaddr(sender), optionlist))
        return self.getreply()

def rcpt(self, recip, options=[]):
        """SMTP 'rcpt' command -- indicates 1 recipient for this mail."""
        optionlist = ''
        if options and self.does_esmtp:
            optionlist = ' ' + ' '.join(options)
        self.putcmd("rcpt", "TO:%s%s" % (quoteaddr(recip), optionlist))
        return self.getreply()

def data(self, msg):
        """SMTP 'DATA' command -- sends message data to server.

Automatically quotes lines beginning with a period per rfc821.
        Raises SMTPDataError if there is an unexpected reply to the
        DATA command; the return value from this method is the final
        response code received when the all data is sent.
        """
        self.putcmd("data")
        (code, repl) = self.getreply()
        if self.debuglevel > 0:
            print>>stderr, "data:", (code, repl)
        if code != 354:
            raise SMTPDataError(code, repl)
        else:
            q = quotedata(msg)
            if q[-2:] != CRLF:
                q = q + CRLF
            q = q + "." + CRLF
            self.send(q)
            (code, msg) = self.getreply()
            if self.debuglevel > 0:
                print>>stderr, "data:", (code, msg)
            return (code, msg)

def verify(self, address):
        """SMTP 'verify' command -- checks for address validity."""
        self.putcmd("vrfy", _addr_only(address))
        return self.getreply()
    # a.k.a.
    vrfy = verify

def expn(self, address):
        """SMTP 'expn' command -- expands a mailing list."""
        self.putcmd("expn", _addr_only(address))
        return self.getreply()

# some useful methods

def ehlo_or_helo_if_needed(self):
        """Call self.ehlo() and/or self.helo() if needed.

If there has been no previous EHLO or HELO command this session, this
        method tries ESMTP EHLO first.

This method may raise the following exceptions:

SMTPHeloError            The server didn't reply properly to
                                  the helo greeting.
        """
        if self.helo_resp is None and self.ehlo_resp is None:
            if not (200 <= self.ehlo()[0] <= 299):
                (code, resp) = self.helo()
                if not (200 <= code <= 299):
                    raise SMTPHeloError(code, resp)

def login(self, user, password):
        """Log in on an SMTP server that requires authentication.

The arguments are:
            - user:     The user name to authenticate with.
            - password: The password for the authentication.

If there has been no previous EHLO or HELO command this session, this
        method tries ESMTP EHLO first.

This method will return normally if the authentication was successful.

This method may raise the following exceptions:

SMTPHeloError            The server didn't reply properly to
                                  the helo greeting.
         SMTPAuthenticationError  The server didn't accept the username/
                                  password combination.
         SMTPException            No suitable authentication method was
                                  found.
        """

def encode_cram_md5(challenge, user, password):
            challenge = base64.decodestring(challenge)
            response = user + " " + hmac.HMAC(password, challenge).hexdigest()
            return encode_base64(response, eol="")

def encode_plain(user, password):
            return encode_base64("\0%s\0%s" % (user, password), eol="")

AUTH_PLAIN = "PLAIN"
        AUTH_CRAM_MD5 = "CRAM-MD5"
        AUTH_LOGIN = "LOGIN"

self.ehlo_or_helo_if_needed()

if not self.has_extn("auth"):
            raise SMTPException("SMTP AUTH extension not supported by server.")

# Authentication methods the server supports:
        authlist = self.esmtp_features["auth"].split()

# List of authentication methods we support: from preferred to
        # less preferred methods. Except for the purpose of testing the weaker
        # ones, we prefer stronger methods like CRAM-MD5:
        preferred_auths = [AUTH_CRAM_MD5, AUTH_PLAIN, AUTH_LOGIN]

# Determine the authentication method we'll use
        authmethod = None
        for method in preferred_auths:
            if method in authlist:
                authmethod = method
                break

if authmethod == AUTH_CRAM_MD5:
            (code, resp) = self.docmd("AUTH", AUTH_CRAM_MD5)
            if code == 503:
                # 503 == 'Error: already authenticated'
                return (code, resp)
            (code, resp) = self.docmd(encode_cram_md5(resp, user, password))
        elif authmethod == AUTH_PLAIN:
            (code, resp) = self.docmd("AUTH",
                AUTH_PLAIN + " " + encode_plain(user, password))
        elif authmethod == AUTH_LOGIN:
            (code, resp) = self.docmd("AUTH",
                "%s %s" % (AUTH_LOGIN, encode_base64(user, eol="")))
            if code != 334:
                raise SMTPAuthenticationError(code, resp)
            (code, resp) = self.docmd(encode_base64(password, eol=""))
        elif authmethod is None:
            raise SMTPException("No suitable authentication method found.")
        if code not in (235, 503):
            # 235 == 'Authentication successful'
            # 503 == 'Error: already authenticated'
            raise SMTPAuthenticationError(code, resp)
        return (code, resp)

def starttls(self, keyfile=None, certfile=None):
        """Puts the connection to the SMTP server into TLS mode.

If there has been no previous EHLO or HELO command this session, this
        method tries ESMTP EHLO first.

If the server supports TLS, this will encrypt the rest of the SMTP
        session. If you provide the keyfile and certfile parameters,
        the identity of the SMTP server and client can be checked. This,
        however, depends on whether the socket module really checks the
        certificates.

This method may raise the following exceptions:

SMTPHeloError            The server didn't reply properly to
                                  the helo greeting.
        """
        self.ehlo_or_helo_if_needed()
        if not self.has_extn("starttls"):
            raise SMTPException("STARTTLS extension not supported by server.")
        (resp, reply) = self.docmd("STARTTLS")
        if resp == 220:
            if not _have_ssl:
                raise RuntimeError("No SSL support included in this Python")
            self.sock = ssl.wrap_socket(self.sock, keyfile, certfile)
            self.file = SSLFakeFile(self.sock)
            # RFC 3207:
            # The client MUST discard any knowledge obtained from
            # the server, such as the list of SMTP service extensions,
            # which was not obtained from the TLS negotiation itself.
            self.helo_resp = None
            self.ehlo_resp = None
            self.esmtp_features = {}
            self.does_esmtp = 0
        else:
            # RFC 3207:
            # 501 Syntax error (no parameters allowed)
            # 454 TLS not available due to temporary reason
            raise SMTPResponseException(resp, reply)
        return (resp, reply)

def sendmail(self, from_addr, to_addrs, msg, mail_options=[],
                 rcpt_options=[]):
        """This command performs an entire mail transaction.

The arguments are:
            - from_addr    : The address sending this mail.
            - to_addrs     : A list of addresses to send this mail to.  A bare
                             string will be treated as a list with 1 address.
            - msg          : The message to send.
            - mail_options : List of ESMTP options (such as 8bitmime) for the
                             mail command.
            - rcpt_options : List of ESMTP options (such as DSN commands) for
                             all the rcpt commands.

If there has been no previous EHLO or HELO command this session, this
        method tries ESMTP EHLO first.  If the server does ESMTP, message size
        and each of the specified options will be passed to it.  If EHLO
        fails, HELO will be tried and ESMTP options suppressed.

This method will return normally if the mail is accepted for at least
        one recipient.  It returns a dictionary, with one entry for each
        recipient that was refused.  Each entry contains a tuple of the SMTP
        error code and the accompanying error message sent by the server.

This method may raise the following exceptions:

SMTPHeloError          The server didn't reply properly to
                                the helo greeting.
         SMTPRecipientsRefused  The server rejected ALL recipients
                                (no mail was sent).
         SMTPSenderRefused      The server didn't accept the from_addr.
         SMTPDataError          The server replied with an unexpected
                                error code (other than a refusal of
                                a recipient).

Note: the connection will be open even after an exception is raised.

Example:

>>> import smtplib
         >>> s=smtplib.SMTP("localhost")
         >>> tolist=["one@one.org","two@two.org","three@three.org","four@four.org"]
         >>> msg = '''\\
         ... From: Me@my.org
         ... Subject: testin'...
         ...
         ... This is a test '''
         >>> s.sendmail("me@my.org",tolist,msg)
         { "three@three.org" : ( 550 ,"User unknown" ) }
         >>> s.quit()

In the above example, the message was accepted for delivery to three
        of the four addresses, and one was rejected, with the error code
        550.  If all addresses are accepted, then the method will return an
        empty dictionary.

"""
        self.ehlo_or_helo_if_needed()
        esmtp_opts = []
        if self.does_esmtp:
            # Hmmm? what's this? -ddm
            # self.esmtp_features['7bit']=""
            if self.has_extn('size'):
                esmtp_opts.append("size=%d" % len(msg))
            for option in mail_options:
                esmtp_opts.append(option)

(code, resp) = self.mail(from_addr, esmtp_opts)
        if code != 250:
            self.rset()
            raise SMTPSenderRefused(code, resp, from_addr)
        senderrs = {}
        if isinstance(to_addrs, basestring):
            to_addrs = [to_addrs]
        for each in to_addrs:
            (code, resp) = self.rcpt(each, rcpt_options)
            if (code != 250) and (code != 251):
                senderrs[each] = (code, resp)
        if len(senderrs) == len(to_addrs):
            # the server refused all our recipients
            self.rset()
            raise SMTPRecipientsRefused(senderrs)
        (code, resp) = self.data(msg)
        if code != 250:
            self.rset()
            raise SMTPDataError(code, resp)
        #if we got here then somebody got our mail
        return senderrs

def close(self):
        """Close the connection to the SMTP server."""
        if self.file:
            self.file.close()
        self.file = None
        if self.sock:
            self.sock.close()
        self.sock = None

def quit(self):
        """Terminate the SMTP session."""
        res = self.docmd("quit")
        self.close()
        return res

if _have_ssl:

class SMTP_SSL(SMTP):
        """ This is a subclass derived from SMTP that connects over an SSL encrypted
        socket (to use this class you need a socket module that was compiled with SSL
        support). If host is not specified, '' (the local host) is used. If port is
        omitted, the standard SMTP-over-SSL port (465) is used. keyfile and certfile
        are also optional - they can contain a PEM formatted private key and
        certificate chain file for the SSL connection.
        """

default_port = SMTP_SSL_PORT

def __init__(self, host='', port=0, local_hostname=None,
                     keyfile=None, certfile=None,
                     timeout=socket._GLOBAL_DEFAULT_TIMEOUT):
            self.keyfile = keyfile
            self.certfile = certfile
            SMTP.__init__(self, host, port, local_hostname, timeout)

def _get_socket(self, host, port, timeout):
            if self.debuglevel > 0:
                print>>stderr, 'connect:', (host, port)
            new_socket = socket.create_connection((host, port), timeout)
            new_socket = ssl.wrap_socket(new_socket, self.keyfile, self.certfile)
            self.file = SSLFakeFile(new_socket)
            return new_socket

__all__.append("SMTP_SSL")

#
# LMTP extension
#
LMTP_PORT = 2003

class LMTP(SMTP):
    """LMTP - Local Mail Transfer Protocol

The LMTP protocol, which is very similar to ESMTP, is heavily based
    on the standard SMTP client. It's common to use Unix sockets for LMTP,
    so our connect() method must support that as well as a regular
    host:port server. To specify a Unix socket, you must use an absolute
    path as the host, starting with a '/'.

Authentication is supported, using the regular SMTP mechanism. When
    using a Unix socket, LMTP generally don't support or require any
    authentication, but your mileage might vary."""

ehlo_msg = "lhlo"

def __init__(self, host='', port=LMTP_PORT, local_hostname=None):
        """Initialize a new instance."""
        SMTP.__init__(self, host, port, local_hostname)

def connect(self, host='localhost', port=0):
        """Connect to the LMTP daemon, on either a Unix or a TCP socket."""
        if host[0] != '/':
            return SMTP.connect(self, host, port)

# Handle Unix-domain sockets.
        try:
            self.sock = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
            self.sock.connect(host)
        except socket.error:
            if self.debuglevel > 0:
                print>>stderr, 'connect fail:', host
            if self.sock:
                self.sock.close()
            self.sock = None
            raise
        (code, msg) = self.getreply()
        if self.debuglevel > 0:
            print>>stderr, "connect:", msg
        return (code, msg)

# Test the sendmail method, which tests most of the others.
# Note: This always sends to localhost.
if __name__ == '__main__':
    import sys

def prompt(prompt):
        sys.stdout.write(prompt + ": ")
        return sys.stdin.readline().strip()

fromaddr = prompt("From")
    toaddrs = prompt("To").split(',')
    print "Enter message, end with ^D:"
    msg = ''
    while 1:
        line = sys.stdin.readline()
        if not line:
            break
        msg = msg + line
    print "Message length is %d" % len(msg)

server = SMTP('localhost')
    server.set_debuglevel(1)
    server.sendmail(fromaddr, toaddrs, msg)
    server.quit()

${this.title}

Code Editor : smtplib.py