Gecko [ sachasauda.akalacademy.ac.in ]

Name	Size	Permission
GL	[ DIR ]	drwxr-xr-x
X11	[ DIR ]	drwxr-xr-x
arpa	[ DIR ]	drwxr-xr-x
asm	[ DIR ]	drwxr-xr-x
asm-generic	[ DIR ]	drwxr-xr-x
bind9	[ DIR ]	drwxr-xr-x
bits	[ DIR ]	drwxr-xr-x
c++	[ DIR ]	drwxr-xr-x
db4.7.25	[ DIR ]	drwxr-xr-x
drm	[ DIR ]	drwxr-xr-x
e2p	[ DIR ]	drwxr-xr-x
et	[ DIR ]	drwxr-xr-x
ext2fs	[ DIR ]	drwxr-xr-x
fontconfig	[ DIR ]	drwxr-xr-x
freetype2	[ DIR ]	drwxr-xr-x
gdbm	[ DIR ]	drwxr-xr-x
gnu	[ DIR ]	drwxr-xr-x
gssapi	[ DIR ]	drwxr-xr-x
gssrpc	[ DIR ]	drwxr-xr-x
kadm5	[ DIR ]	drwxr-xr-x
krb5	[ DIR ]	drwxr-xr-x
libdb	[ DIR ]	drwxr-xr-x
libexslt	[ DIR ]	drwxr-xr-x
libltdl	[ DIR ]	drwxr-xr-x
libpng15	[ DIR ]	drwxr-xr-x
libxml2	[ DIR ]	drwxr-xr-x
libxslt	[ DIR ]	drwxr-xr-x
linux	[ DIR ]	drwxr-xr-x
lzma	[ DIR ]	drwxr-xr-x
misc	[ DIR ]	drwxr-xr-x
mtd	[ DIR ]	drwxr-xr-x
mysql	[ DIR ]	drwxr-xr-x
ncurses	[ DIR ]	drwxr-xr-x
ncursesw	[ DIR ]	drwxr-xr-x
net	[ DIR ]	drwxr-xr-x
netash	[ DIR ]	drwxr-xr-x
netatalk	[ DIR ]	drwxr-xr-x
netax25	[ DIR ]	drwxr-xr-x
neteconet	[ DIR ]	drwxr-xr-x
netinet	[ DIR ]	drwxr-xr-x
netipx	[ DIR ]	drwxr-xr-x
netiucv	[ DIR ]	drwxr-xr-x
netpacket	[ DIR ]	drwxr-xr-x
netrom	[ DIR ]	drwxr-xr-x
netrose	[ DIR ]	drwxr-xr-x
nfs	[ DIR ]	drwxr-xr-x
openssl	[ DIR ]	drwxr-xr-x
protocols	[ DIR ]	drwxr-xr-x
python2.7	[ DIR ]	drwxr-xr-x
python3.6m	[ DIR ]	drwxr-xr-x
quota	[ DIR ]	drwxr-xr-x
rdma	[ DIR ]	drwxr-xr-x
rpc	[ DIR ]	drwxr-xr-x
rpcsvc	[ DIR ]	drwxr-xr-x
scsi	[ DIR ]	drwxr-xr-x
security	[ DIR ]	drwxr-xr-x
selinux	[ DIR ]	drwxr-xr-x
sepol	[ DIR ]	drwxr-xr-x
sound	[ DIR ]	drwxr-xr-x
sys	[ DIR ]	drwxr-xr-x
uapi	[ DIR ]	drwxr-xr-x
uuid	[ DIR ]	drwxr-xr-x
video	[ DIR ]	drwxr-xr-x
xcb	[ DIR ]	drwxr-xr-x
xen	[ DIR ]	drwxr-xr-x
FlexLexer.h	6.07 KB	-rw-r--r--
_G_config.h	1.26 KB	-rw-r--r--
a.out.h	4.25 KB	-rw-r--r--
aio.h	7.27 KB	-rw-r--r--
aliases.h	2 KB	-rw-r--r--
alloca.h	1.19 KB	-rw-r--r--
ar.h	1.68 KB	-rw-r--r--
argp.h	24.75 KB	-rw-r--r--
argz.h	6.96 KB	-rw-r--r--
assert.h	3.52 KB	-rw-r--r--
autosprintf.h	2.33 KB	-rw-r--r--
byteswap.h	1.41 KB	-rw-r--r--
com_err.h	2.07 KB	-rw-r--r--
complex.h	3.62 KB	-rw-r--r--
cpio.h	2.21 KB	-rw-r--r--
cpufreq.h	5.8 KB	-rw-r--r--
crypt.h	2.22 KB	-rw-r--r--
ctype.h	11.52 KB	-rw-r--r--
curses.h	93.19 KB	-rw-r--r--
cursesapp.h	6.62 KB	-rw-r--r--
cursesf.h	27.05 KB	-rw-r--r--
cursesm.h	19.09 KB	-rw-r--r--
cursesp.h	8.3 KB	-rw-r--r--
cursesw.h	48.24 KB	-rw-r--r--
cursslk.h	7.13 KB	-rw-r--r--
db.h	120.21 KB	-r--r--r--
db_185.h	5.84 KB	-r--r--r--
dbm.h	1.37 KB	-rw-r--r--
dirent.h	12.34 KB	-rw-r--r--
dlfcn.h	6.88 KB	-rw-r--r--
elf.h	141.01 KB	-rw-r--r--
endian.h	2.95 KB	-rw-r--r--
entities.h	4.56 KB	-rw-r--r--
envz.h	2.82 KB	-rw-r--r--
err.h	2.18 KB	-rw-r--r--
errno.h	2.33 KB	-rw-r--r--
error.h	2.01 KB	-rw-r--r--
eti.h	2.82 KB	-rw-r--r--
etip.h	9.04 KB	-rw-r--r--
execinfo.h	1.5 KB	-rw-r--r--
expat.h	40.92 KB	-rw-r--r--
expat_external.h	3.29 KB	-rw-r--r--
fcntl.h	9.89 KB	-rw-r--r--
features.h	12.87 KB	-rw-r--r--
fenv.h	4.5 KB	-rw-r--r--
fmtmsg.h	3.18 KB	-rw-r--r--
fnmatch.h	2.27 KB	-rw-r--r--
form.h	17.56 KB	-rw-r--r--
fpu_control.h	3.5 KB	-rw-r--r--
fstab.h	3.04 KB	-rw-r--r--
fts.h	5.17 KB	-rw-r--r--
ftw.h	5.15 KB	-rw-r--r--
gconv.h	5.16 KB	-rw-r--r--
gcrypt-module.h	7.18 KB	-rw-r--r--
gcrypt.h	76.51 KB	-rw-r--r--
gd.h	32.02 KB	-rw-r--r--
gd_io.h	1.13 KB	-rw-r--r--
gdbm.h	5.75 KB	-rw-r--r--
gdcache.h	2.75 KB	-rw-r--r--
gdfontg.h	623 B	-rw-r--r--
gdfontl.h	621 B	-rw-r--r--
gdfontmb.h	590 B	-rw-r--r--
gdfonts.h	585 B	-rw-r--r--
gdfontt.h	617 B	-rw-r--r--
gdfx.h	2.34 KB	-rw-r--r--
getopt.h	6.53 KB	-rw-r--r--
gettext-po.h	15.17 KB	-rw-r--r--
glob.h	6.51 KB	-rw-r--r--
gnu-versions.h	2.29 KB	-rw-r--r--
gpg-error.h	23.66 KB	-rw-r--r--
grp.h	6.75 KB	-rw-r--r--
gshadow.h	4.43 KB	-rw-r--r--
gssapi.h	181 B	-rw-r--r--
iconv.h	1.83 KB	-rw-r--r--
idn-free.h	2.41 KB	-rw-r--r--
idn-int.h	20 B	-rw-r--r--
idna.h	3.48 KB	-rw-r--r--
ieee754.h	4.81 KB	-rw-r--r--
ifaddrs.h	2.77 KB	-rw-r--r--
inttypes.h	11.61 KB	-rw-r--r--
jconfig.h	1.7 KB	-rw-r--r--
jerror.h	14.4 KB	-rw-r--r--
jmorecfg.h	13.5 KB	-rw-r--r--
jpeglib.h	49.12 KB	-rw-r--r--
kdb.h	60.12 KB	-rw-r--r--
keyutils.h	7.08 KB	-rw-r--r--
krad.h	8.72 KB	-rw-r--r--
krb5.h	402 B	-rw-r--r--
langinfo.h	15.57 KB	-rw-r--r--
lastlog.h	126 B	-rw-r--r--
libaio.h	7.8 KB	-rw-r--r--
libgen.h	1.37 KB	-rw-r--r--
libintl.h	4.49 KB	-rw-r--r--
libio.h	16.87 KB	-rw-r--r--
libtasn1.h	12.46 KB	-rw-r--r--
limits.h	4.42 KB	-rw-r--r--
link.h	6.99 KB	-rw-r--r--
locale.h	7.78 KB	-rw-r--r--
ltdl.h	5.58 KB	-rw-r--r--
lzma.h	9.51 KB	-rw-r--r--
malloc.h	6.44 KB	-rw-r--r--
math.h	15.7 KB	-rw-r--r--
mcheck.h	2.4 KB	-rw-r--r--
memory.h	962 B	-rw-r--r--
menu.h	11.67 KB	-rw-r--r--
mntent.h	3.3 KB	-rw-r--r--
monetary.h	1.73 KB	-rw-r--r--
mqueue.h	3.7 KB	-rw-r--r--
nc_tparm.h	4.05 KB	-rw-r--r--
ncurses.h	93.19 KB	-rw-r--r--
ncurses_dll.h	3.83 KB	-rw-r--r--
ndbm.h	2.39 KB	-rw-r--r--
netdb.h	27.46 KB	-rw-r--r--
nl_types.h	1.73 KB	-rw-r--r--
nss.h	1.85 KB	-rw-r--r--
obstack.h	18.84 KB	-rw-r--r--
panel.h	3.97 KB	-rw-r--r--
paths.h	2.91 KB	-rw-r--r--
pcre.h	29.73 KB	-rw-r--r--
pcre_scanner.h	6.45 KB	-rw-r--r--
pcre_stringpiece.h	6.11 KB	-rw-r--r--
pcrecpp.h	25.91 KB	-rw-r--r--
pcrecpparg.h	6.62 KB	-rw-r--r--
pcreposix.h	5.32 KB	-rw-r--r--
png.h	113.36 KB	-rw-r--r--
pngconf.h	20.94 KB	-rw-r--r--
pnglibconf.h	6.3 KB	-rw-r--r--
poll.h	22 B	-rw-r--r--
pr29.h	2.07 KB	-rw-r--r--
printf.h	6.56 KB	-rw-r--r--
profile.h	11.87 KB	-rw-r--r--
pthread.h	39.95 KB	-rw-r--r--
pty.h	1.51 KB	-rw-r--r--
punycode.h	9.36 KB	-rw-r--r--
pwd.h	5.87 KB	-rw-r--r--
re_comp.h	957 B	-rw-r--r--
regex.h	21.58 KB	-rw-r--r--
regexp.h	6.89 KB	-rw-r--r--
resolv.h	14.67 KB	-rw-r--r--
sched.h	4.55 KB	-rw-r--r--
search.h	5.11 KB	-rw-r--r--
semaphore.h	2.36 KB	-rw-r--r--
setjmp.h	3.97 KB	-rw-r--r--
sgtty.h	1.33 KB	-rw-r--r--
shadow.h	5.1 KB	-rw-r--r--
signal.h	13.3 KB	-rw-r--r--
spawn.h	6.53 KB	-rw-r--r--
stab.h	264 B	-rw-r--r--
stdc-predef.h	1.59 KB	-rw-r--r--
stdint.h	7.94 KB	-rw-r--r--
stdio.h	30.9 KB	-rw-r--r--
stdio_ext.h	2.74 KB	-rw-r--r--
stdlib.h	33.23 KB	-rw-r--r--
string.h	21.75 KB	-rw-r--r--
stringprep.h	8 KB	-rw-r--r--
strings.h	4.55 KB	-rw-r--r--
syscall.h	25 B	-rw-r--r--
sysexits.h	5.11 KB	-rw-r--r--
syslog.h	24 B	-rw-r--r--
tar.h	3.67 KB	-rw-r--r--
tcpd.h	11.48 KB	-rw-r--r--
term.h	38.63 KB	-rw-r--r--
term_entry.h	7.91 KB	-rw-r--r--
termcap.h	3.4 KB	-rw-r--r--
termio.h	214 B	-rw-r--r--
termios.h	3.52 KB	-rw-r--r--
tgmath.h	18.11 KB	-rw-r--r--
thread_db.h	15.65 KB	-rw-r--r--
tic.h	12.35 KB	-rw-r--r--
tiff.h	34.95 KB	-rw-r--r--
tiffconf-64.h	3.35 KB	-rw-r--r--
tiffconf.h	250 B	-rw-r--r--
tiffio.h	23.14 KB	-rw-r--r--
tiffio.hxx	1.66 KB	-rw-r--r--
tiffvers.h	410 B	-rw-r--r--
time.h	13.4 KB	-rw-r--r--
tld.h	4.54 KB	-rw-r--r--
ttyent.h	2.44 KB	-rw-r--r--
uchar.h	2.42 KB	-rw-r--r--
ucontext.h	1.92 KB	-rw-r--r--
ulimit.h	1.55 KB	-rw-r--r--
unctrl.h	3.03 KB	-rw-r--r--
unistd.h	41.78 KB	-rw-r--r--
ustat.h	23 B	-rw-r--r--
utime.h	1.5 KB	-rw-r--r--
utmp.h	3.16 KB	-rw-r--r--
utmpx.h	4.02 KB	-rw-r--r--
values.h	1.92 KB	-rw-r--r--
verto-module.h	6.48 KB	-rw-r--r--
verto.h	18.57 KB	-rw-r--r--
wait.h	22 B	-rw-r--r--
wchar.h	31.37 KB	-rw-r--r--
wctype.h	10.89 KB	-rw-r--r--
wordexp.h	2.47 KB	-rw-r--r--
xlocale.h	1.66 KB	-rw-r--r--
zconf.h	14.92 KB	-rw-r--r--
zlib.h	84.68 KB	-rw-r--r--

Code Editor : pcrecpp.h

// Copyright (c) 2005, Google Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
//     * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//     * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
//     * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Author: Sanjay Ghemawat
// Support for PCRE_XXX modifiers added by Giuseppe Maxia, July 2005

#ifndef _PCRECPP_H
#define _PCRECPP_H

// C++ interface to the pcre regular-expression library.  RE supports
// Perl-style regular expressions (with extensions like \d, \w, \s,
// ...).
//
// -----------------------------------------------------------------------
// REGEXP SYNTAX:
//
// This module is part of the pcre library and hence supports its syntax
// for regular expressions.
//
// The syntax is pretty similar to Perl's.  For those not familiar
// with Perl's regular expressions, here are some examples of the most
// commonly used extensions:
//
//   "hello (\\w+) world"  -- \w matches a "word" character
//   "version (\\d+)"      -- \d matches a digit
//   "hello\\s+world"      -- \s matches any whitespace character
//   "\\b(\\w+)\\b"        -- \b matches empty string at a word boundary
//   "(?i)hello"           -- (?i) turns on case-insensitive matching
//   "/\\*(.*?)\\*/"       -- .*? matches . minimum no. of times possible
//
// -----------------------------------------------------------------------
// MATCHING INTERFACE:
//
// The "FullMatch" operation checks that supplied text matches a
// supplied pattern exactly.
//
// Example: successful match
//    pcrecpp::RE re("h.*o");
//    re.FullMatch("hello");
//
// Example: unsuccessful match (requires full match):
//    pcrecpp::RE re("e");
//    !re.FullMatch("hello");
//
// Example: creating a temporary RE object:
//    pcrecpp::RE("h.*o").FullMatch("hello");
//
// You can pass in a "const char*" or a "string" for "text".  The
// examples below tend to use a const char*.
//
// You can, as in the different examples above, store the RE object
// explicitly in a variable or use a temporary RE object.  The
// examples below use one mode or the other arbitrarily.  Either
// could correctly be used for any of these examples.
//
// -----------------------------------------------------------------------
// MATCHING WITH SUB-STRING EXTRACTION:
//
// You can supply extra pointer arguments to extract matched subpieces.
//
// Example: extracts "ruby" into "s" and 1234 into "i"
//    int i;
//    string s;
//    pcrecpp::RE re("(\\w+):(\\d+)");
//    re.FullMatch("ruby:1234", &s, &i);
//
// Example: does not try to extract any extra sub-patterns
//    re.FullMatch("ruby:1234", &s);
//
// Example: does not try to extract into NULL
//    re.FullMatch("ruby:1234", NULL, &i);
//
// Example: integer overflow causes failure
//    !re.FullMatch("ruby:1234567891234", NULL, &i);
//
// Example: fails because there aren't enough sub-patterns:
//    !pcrecpp::RE("\\w+:\\d+").FullMatch("ruby:1234", &s);
//
// Example: fails because string cannot be stored in integer
//    !pcrecpp::RE("(.*)").FullMatch("ruby", &i);
//
// The provided pointer arguments can be pointers to any scalar numeric
// type, or one of
//    string        (matched piece is copied to string)
//    StringPiece   (StringPiece is mutated to point to matched piece)
//    T             (where "bool T::ParseFrom(const char*, int)" exists)
//    NULL          (the corresponding matched sub-pattern is not copied)
//
// CAVEAT: An optional sub-pattern that does not exist in the matched
// string is assigned the empty string.  Therefore, the following will
// return false (because the empty string is not a valid number):
//    int number;
//    pcrecpp::RE::FullMatch("abc", "[a-z]+(\\d+)?", &number);
//
// -----------------------------------------------------------------------
// DO_MATCH
//
// The matching interface supports at most 16 arguments per call.
// If you need more, consider using the more general interface
// pcrecpp::RE::DoMatch().  See pcrecpp.h for the signature for DoMatch.
//
// -----------------------------------------------------------------------
// PARTIAL MATCHES
//
// You can use the "PartialMatch" operation when you want the pattern
// to match any substring of the text.
//
// Example: simple search for a string:
//    pcrecpp::RE("ell").PartialMatch("hello");
//
// Example: find first number in a string:
//    int number;
//    pcrecpp::RE re("(\\d+)");
//    re.PartialMatch("x*100 + 20", &number);
//    assert(number == 100);
//
// -----------------------------------------------------------------------
// UTF-8 AND THE MATCHING INTERFACE:
//
// By default, pattern and text are plain text, one byte per character.
// The UTF8 flag, passed to the constructor, causes both pattern
// and string to be treated as UTF-8 text, still a byte stream but
// potentially multiple bytes per character. In practice, the text
// is likelier to be UTF-8 than the pattern, but the match returned
// may depend on the UTF8 flag, so always use it when matching
// UTF8 text.  E.g., "." will match one byte normally but with UTF8
// set may match up to three bytes of a multi-byte character.
//
// Example:
//    pcrecpp::RE_Options options;
//    options.set_utf8();
//    pcrecpp::RE re(utf8_pattern, options);
//    re.FullMatch(utf8_string);
//
// Example: using the convenience function UTF8():
//    pcrecpp::RE re(utf8_pattern, pcrecpp::UTF8());
//    re.FullMatch(utf8_string);
//
// NOTE: The UTF8 option is ignored if pcre was not configured with the
//       --enable-utf8 flag.
//
// -----------------------------------------------------------------------
// PASSING MODIFIERS TO THE REGULAR EXPRESSION ENGINE
//
// PCRE defines some modifiers to change the behavior of the regular
// expression engine.
// The C++ wrapper defines an auxiliary class, RE_Options, as a vehicle
// to pass such modifiers to a RE class.
//
// Currently, the following modifiers are supported
//
//    modifier              description               Perl corresponding
//
//    PCRE_CASELESS         case insensitive match    /i
//    PCRE_MULTILINE        multiple lines match      /m
//    PCRE_DOTALL           dot matches newlines      /s
//    PCRE_DOLLAR_ENDONLY   $ matches only at end     N/A
//    PCRE_EXTRA            strict escape parsing     N/A
//    PCRE_EXTENDED         ignore whitespaces        /x
//    PCRE_UTF8             handles UTF8 chars        built-in
//    PCRE_UNGREEDY         reverses * and *?         N/A
//    PCRE_NO_AUTO_CAPTURE  disables matching parens  N/A (*)
//
// (For a full account on how each modifier works, please check the
// PCRE API reference manual).
//
// (*) Both Perl and PCRE allow non matching parentheses by means of the
// "?:" modifier within the pattern itself. e.g. (?:ab|cd) does not
// capture, while (ab|cd) does.
//
// For each modifier, there are two member functions whose name is made
// out of the modifier in lowercase, without the "PCRE_" prefix. For
// instance, PCRE_CASELESS is handled by
//    bool caseless(),
// which returns true if the modifier is set, and
//    RE_Options & set_caseless(bool),
// which sets or unsets the modifier.
//
// Moreover, PCRE_EXTRA_MATCH_LIMIT can be accessed through the
// set_match_limit() and match_limit() member functions.
// Setting match_limit to a non-zero value will limit the executation of
// pcre to keep it from doing bad things like blowing the stack or taking
// an eternity to return a result.  A value of 5000 is good enough to stop
// stack blowup in a 2MB thread stack.  Setting match_limit to zero will
// disable match limiting.  Alternately, you can set match_limit_recursion()
// which uses PCRE_EXTRA_MATCH_LIMIT_RECURSION to limit how much pcre
// recurses.  match_limit() caps the number of matches pcre does;
// match_limit_recrusion() caps the depth of recursion.
//
// Normally, to pass one or more modifiers to a RE class, you declare
// a RE_Options object, set the appropriate options, and pass this
// object to a RE constructor. Example:
//
//    RE_options opt;
//    opt.set_caseless(true);
//
//    if (RE("HELLO", opt).PartialMatch("hello world")) ...
//
// RE_options has two constructors. The default constructor takes no
// arguments and creates a set of flags that are off by default.
//
// The optional parameter 'option_flags' is to facilitate transfer
// of legacy code from C programs.  This lets you do
//    RE(pattern, RE_Options(PCRE_CASELESS|PCRE_MULTILINE)).PartialMatch(str);
//
// But new code is better off doing
//    RE(pattern,
//      RE_Options().set_caseless(true).set_multiline(true)).PartialMatch(str);
// (See below)
//
// If you are going to pass one of the most used modifiers, there are some
// convenience functions that return a RE_Options class with the
// appropriate modifier already set:
// CASELESS(), UTF8(), MULTILINE(), DOTALL(), EXTENDED()
//
// If you need to set several options at once, and you don't want to go
// through the pains of declaring a RE_Options object and setting several
// options, there is a parallel method that give you such ability on the
// fly. You can concatenate several set_xxxxx member functions, since each
// of them returns a reference to its class object.  e.g.: to pass
// PCRE_CASELESS, PCRE_EXTENDED, and PCRE_MULTILINE to a RE with one
// statement, you may write
//
//    RE(" ^ xyz \\s+ .* blah$", RE_Options()
//                            .set_caseless(true)
//                            .set_extended(true)
//                            .set_multiline(true)).PartialMatch(sometext);
//
// -----------------------------------------------------------------------
// SCANNING TEXT INCREMENTALLY
//
// The "Consume" operation may be useful if you want to repeatedly
// match regular expressions at the front of a string and skip over
// them as they match.  This requires use of the "StringPiece" type,
// which represents a sub-range of a real string.  Like RE, StringPiece
// is defined in the pcrecpp namespace.
//
// Example: read lines of the form "var = value" from a string.
//    string contents = ...;                 // Fill string somehow
//    pcrecpp::StringPiece input(contents);  // Wrap in a StringPiece
//
//    string var;
//    int value;
//    pcrecpp::RE re("(\\w+) = (\\d+)\n");
//    while (re.Consume(&input, &var, &value)) {
//      ...;
//    }
//
// Each successful call to "Consume" will set "var/value", and also
// advance "input" so it points past the matched text.
//
// The "FindAndConsume" operation is similar to "Consume" but does not
// anchor your match at the beginning of the string.  For example, you
// could extract all words from a string by repeatedly calling
//     pcrecpp::RE("(\\w+)").FindAndConsume(&input, &word)
//
// -----------------------------------------------------------------------
// PARSING HEX/OCTAL/C-RADIX NUMBERS
//
// By default, if you pass a pointer to a numeric value, the
// corresponding text is interpreted as a base-10 number.  You can
// instead wrap the pointer with a call to one of the operators Hex(),
// Octal(), or CRadix() to interpret the text in another base.  The
// CRadix operator interprets C-style "0" (base-8) and "0x" (base-16)
// prefixes, but defaults to base-10.
//
// Example:
//   int a, b, c, d;
//   pcrecpp::RE re("(.*) (.*) (.*) (.*)");
//   re.FullMatch("100 40 0100 0x40",
//                pcrecpp::Octal(&a), pcrecpp::Hex(&b),
//                pcrecpp::CRadix(&c), pcrecpp::CRadix(&d));
// will leave 64 in a, b, c, and d.
//
// -----------------------------------------------------------------------
// REPLACING PARTS OF STRINGS
//
// You can replace the first match of "pattern" in "str" with
// "rewrite".  Within "rewrite", backslash-escaped digits (\1 to \9)
// can be used to insert text matching corresponding parenthesized
// group from the pattern.  \0 in "rewrite" refers to the entire
// matching text.  E.g.,
//
//   string s = "yabba dabba doo";
//   pcrecpp::RE("b+").Replace("d", &s);
//
// will leave "s" containing "yada dabba doo".  The result is true if
// the pattern matches and a replacement occurs, or false otherwise.
//
// GlobalReplace() is like Replace(), except that it replaces all
// occurrences of the pattern in the string with the rewrite.
// Replacements are not subject to re-matching.  E.g.,
//
//   string s = "yabba dabba doo";
//   pcrecpp::RE("b+").GlobalReplace("d", &s);
//
// will leave "s" containing "yada dada doo".  It returns the number
// of replacements made.
//
// Extract() is like Replace(), except that if the pattern matches,
// "rewrite" is copied into "out" (an additional argument) with
// substitutions.  The non-matching portions of "text" are ignored.
// Returns true iff a match occurred and the extraction happened
// successfully.  If no match occurs, the string is left unaffected.

#include <string>
#include <pcre.h>
#include <pcrecpparg.h>   // defines the Arg class
// This isn't technically needed here, but we include it
// anyway so folks who include pcrecpp.h don't have to.
#include <pcre_stringpiece.h>

namespace pcrecpp {

#define PCRE_SET_OR_CLEAR(b, o) \
    if (b) all_options_ |= (o); else all_options_ &= ~(o); \
    return *this

#define PCRE_IS_SET(o)  \
        (all_options_ & o) == o

/***** Compiling regular expressions: the RE class *****/

// RE_Options allow you to set options to be passed along to pcre,
// along with other options we put on top of pcre.
// Only 9 modifiers, plus match_limit and match_limit_recursion,
// are supported now.
class PCRECPP_EXP_DEFN RE_Options {
 public:
  // constructor
  RE_Options() : match_limit_(0), match_limit_recursion_(0), all_options_(0) {}

// alternative constructor.
  // To facilitate transfer of legacy code from C programs
  //
  // This lets you do
  //    RE(pattern, RE_Options(PCRE_CASELESS|PCRE_MULTILINE)).PartialMatch(str);
  // But new code is better off doing
  //    RE(pattern,
  //      RE_Options().set_caseless(true).set_multiline(true)).PartialMatch(str);
  RE_Options(int option_flags) : match_limit_(0), match_limit_recursion_(0),
                                 all_options_(option_flags) {}
  // we're fine with the default destructor, copy constructor, etc.

// accessors and mutators
  int match_limit() const { return match_limit_; };
  RE_Options &set_match_limit(int limit) {
    match_limit_ = limit;
    return *this;
  }

int match_limit_recursion() const { return match_limit_recursion_; };
  RE_Options &set_match_limit_recursion(int limit) {
    match_limit_recursion_ = limit;
    return *this;
  }

bool caseless() const {
    return PCRE_IS_SET(PCRE_CASELESS);
  }
  RE_Options &set_caseless(bool x) {
    PCRE_SET_OR_CLEAR(x, PCRE_CASELESS);
  }

bool multiline() const {
    return PCRE_IS_SET(PCRE_MULTILINE);
  }
  RE_Options &set_multiline(bool x) {
    PCRE_SET_OR_CLEAR(x, PCRE_MULTILINE);
  }

bool dotall() const {
    return PCRE_IS_SET(PCRE_DOTALL);
  }
  RE_Options &set_dotall(bool x) {
    PCRE_SET_OR_CLEAR(x, PCRE_DOTALL);
  }

bool extended() const {
    return PCRE_IS_SET(PCRE_EXTENDED);
  }
  RE_Options &set_extended(bool x) {
    PCRE_SET_OR_CLEAR(x, PCRE_EXTENDED);
  }

bool dollar_endonly() const {
    return PCRE_IS_SET(PCRE_DOLLAR_ENDONLY);
  }
  RE_Options &set_dollar_endonly(bool x) {
    PCRE_SET_OR_CLEAR(x, PCRE_DOLLAR_ENDONLY);
  }

bool extra() const {
    return PCRE_IS_SET(PCRE_EXTRA);
  }
  RE_Options &set_extra(bool x) {
    PCRE_SET_OR_CLEAR(x, PCRE_EXTRA);
  }

bool ungreedy() const {
    return PCRE_IS_SET(PCRE_UNGREEDY);
  }
  RE_Options &set_ungreedy(bool x) {
    PCRE_SET_OR_CLEAR(x, PCRE_UNGREEDY);
  }

bool utf8() const {
    return PCRE_IS_SET(PCRE_UTF8);
  }
  RE_Options &set_utf8(bool x) {
    PCRE_SET_OR_CLEAR(x, PCRE_UTF8);
  }

bool no_auto_capture() const {
    return PCRE_IS_SET(PCRE_NO_AUTO_CAPTURE);
  }
  RE_Options &set_no_auto_capture(bool x) {
    PCRE_SET_OR_CLEAR(x, PCRE_NO_AUTO_CAPTURE);
  }

RE_Options &set_all_options(int opt) {
    all_options_ = opt;
    return *this;
  }
  int all_options() const {
    return all_options_ ;
  }

// TODO: add other pcre flags

private:
  int match_limit_;
  int match_limit_recursion_;
  int all_options_;
};

// These functions return some common RE_Options
static inline RE_Options UTF8() {
  return RE_Options().set_utf8(true);
}

static inline RE_Options CASELESS() {
  return RE_Options().set_caseless(true);
}
static inline RE_Options MULTILINE() {
  return RE_Options().set_multiline(true);
}

static inline RE_Options DOTALL() {
  return RE_Options().set_dotall(true);
}

static inline RE_Options EXTENDED() {
  return RE_Options().set_extended(true);
}

// Interface for regular expression matching.  Also corresponds to a
// pre-compiled regular expression.  An "RE" object is safe for
// concurrent use by multiple threads.
class PCRECPP_EXP_DEFN RE {
 public:
  // We provide implicit conversions from strings so that users can
  // pass in a string or a "const char*" wherever an "RE" is expected.
  RE(const string& pat) { Init(pat, NULL); }
  RE(const string& pat, const RE_Options& option) { Init(pat, &option); }
  RE(const char* pat) { Init(pat, NULL); }
  RE(const char* pat, const RE_Options& option) { Init(pat, &option); }
  RE(const unsigned char* pat) {
    Init(reinterpret_cast<const char*>(pat), NULL);
  }
  RE(const unsigned char* pat, const RE_Options& option) {
    Init(reinterpret_cast<const char*>(pat), &option);
  }

// Copy constructor & assignment - note that these are expensive
  // because they recompile the expression.
  RE(const RE& re) { Init(re.pattern_, &re.options_); }
  const RE& operator=(const RE& re) {
    if (this != &re) {
      Cleanup();

// This is the code that originally came from Google
      // Init(re.pattern_.c_str(), &re.options_);

// This is the replacement from Ari Pollak
      Init(re.pattern_, &re.options_);
    }
    return *this;
  }

~RE();

// The string specification for this RE.  E.g.
  //   RE re("ab*c?d+");
  //   re.pattern();    // "ab*c?d+"
  const string& pattern() const { return pattern_; }

// If RE could not be created properly, returns an error string.
  // Else returns the empty string.
  const string& error() const { return *error_; }

/***** The useful part: the matching interface *****/

// This is provided so one can do pattern.ReplaceAll() just as
  // easily as ReplaceAll(pattern-text, ....)

bool FullMatch(const StringPiece& text,
                 const Arg& ptr1 = no_arg,
                 const Arg& ptr2 = no_arg,
                 const Arg& ptr3 = no_arg,
                 const Arg& ptr4 = no_arg,
                 const Arg& ptr5 = no_arg,
                 const Arg& ptr6 = no_arg,
                 const Arg& ptr7 = no_arg,
                 const Arg& ptr8 = no_arg,
                 const Arg& ptr9 = no_arg,
                 const Arg& ptr10 = no_arg,
                 const Arg& ptr11 = no_arg,
                 const Arg& ptr12 = no_arg,
                 const Arg& ptr13 = no_arg,
                 const Arg& ptr14 = no_arg,
                 const Arg& ptr15 = no_arg,
                 const Arg& ptr16 = no_arg) const;

bool PartialMatch(const StringPiece& text,
                    const Arg& ptr1 = no_arg,
                    const Arg& ptr2 = no_arg,
                    const Arg& ptr3 = no_arg,
                    const Arg& ptr4 = no_arg,
                    const Arg& ptr5 = no_arg,
                    const Arg& ptr6 = no_arg,
                    const Arg& ptr7 = no_arg,
                    const Arg& ptr8 = no_arg,
                    const Arg& ptr9 = no_arg,
                    const Arg& ptr10 = no_arg,
                    const Arg& ptr11 = no_arg,
                    const Arg& ptr12 = no_arg,
                    const Arg& ptr13 = no_arg,
                    const Arg& ptr14 = no_arg,
                    const Arg& ptr15 = no_arg,
                    const Arg& ptr16 = no_arg) const;

bool Consume(StringPiece* input,
               const Arg& ptr1 = no_arg,
               const Arg& ptr2 = no_arg,
               const Arg& ptr3 = no_arg,
               const Arg& ptr4 = no_arg,
               const Arg& ptr5 = no_arg,
               const Arg& ptr6 = no_arg,
               const Arg& ptr7 = no_arg,
               const Arg& ptr8 = no_arg,
               const Arg& ptr9 = no_arg,
               const Arg& ptr10 = no_arg,
               const Arg& ptr11 = no_arg,
               const Arg& ptr12 = no_arg,
               const Arg& ptr13 = no_arg,
               const Arg& ptr14 = no_arg,
               const Arg& ptr15 = no_arg,
               const Arg& ptr16 = no_arg) const;

bool FindAndConsume(StringPiece* input,
                      const Arg& ptr1 = no_arg,
                      const Arg& ptr2 = no_arg,
                      const Arg& ptr3 = no_arg,
                      const Arg& ptr4 = no_arg,
                      const Arg& ptr5 = no_arg,
                      const Arg& ptr6 = no_arg,
                      const Arg& ptr7 = no_arg,
                      const Arg& ptr8 = no_arg,
                      const Arg& ptr9 = no_arg,
                      const Arg& ptr10 = no_arg,
                      const Arg& ptr11 = no_arg,
                      const Arg& ptr12 = no_arg,
                      const Arg& ptr13 = no_arg,
                      const Arg& ptr14 = no_arg,
                      const Arg& ptr15 = no_arg,
                      const Arg& ptr16 = no_arg) const;

bool Replace(const StringPiece& rewrite,
               string *str) const;

int GlobalReplace(const StringPiece& rewrite,
                    string *str) const;

bool Extract(const StringPiece &rewrite,
               const StringPiece &text,
               string *out) const;

// Escapes all potentially meaningful regexp characters in
  // 'unquoted'.  The returned string, used as a regular expression,
  // will exactly match the original string.  For example,
  //           1.5-2.0?
  // may become:
  //           1\.5\-2\.0\?
  // Note QuoteMeta behaves the same as perl's QuoteMeta function,
  // *except* that it escapes the NUL character (\0) as backslash + 0,
  // rather than backslash + NUL.
  static string QuoteMeta(const StringPiece& unquoted);

/***** Generic matching interface *****/

// Type of match (TODO: Should be restructured as part of RE_Options)
  enum Anchor {
    UNANCHORED,         // No anchoring
    ANCHOR_START,       // Anchor at start only
    ANCHOR_BOTH         // Anchor at start and end
  };

// General matching routine.  Stores the length of the match in
  // "*consumed" if successful.
  bool DoMatch(const StringPiece& text,
               Anchor anchor,
               int* consumed,
               const Arg* const* args, int n) const;

// Return the number of capturing subpatterns, or -1 if the
  // regexp wasn't valid on construction.
  int NumberOfCapturingGroups() const;

// The default value for an argument, to indicate the end of the argument
  // list. This must be used only in optional argument defaults. It should NOT
  // be passed explicitly. Some people have tried to use it like this:
  //
  //   FullMatch(x, y, &z, no_arg, &w);
  //
  // This is a mistake, and will not work.
  static Arg no_arg;

private:

void Init(const string& pattern, const RE_Options* options);
  void Cleanup();

// Match against "text", filling in "vec" (up to "vecsize" * 2/3) with
  // pairs of integers for the beginning and end positions of matched
  // text.  The first pair corresponds to the entire matched text;
  // subsequent pairs correspond, in order, to parentheses-captured
  // matches.  Returns the number of pairs (one more than the number of
  // the last subpattern with a match) if matching was successful
  // and zero if the match failed.
  // I.e. for RE("(foo)|(bar)|(baz)") it will return 2, 3, and 4 when matching
  // against "foo", "bar", and "baz" respectively.
  // When matching RE("(foo)|hello") against "hello", it will return 1.
  // But the values for all subpattern are filled in into "vec".
  int TryMatch(const StringPiece& text,
               int startpos,
               Anchor anchor,
               bool empty_ok,
               int *vec,
               int vecsize) const;

// Append the "rewrite" string, with backslash subsitutions from "text"
  // and "vec", to string "out".
  bool Rewrite(string *out,
               const StringPiece& rewrite,
               const StringPiece& text,
               int *vec,
               int veclen) const;

// internal implementation for DoMatch
  bool DoMatchImpl(const StringPiece& text,
                   Anchor anchor,
                   int* consumed,
                   const Arg* const args[],
                   int n,
                   int* vec,
                   int vecsize) const;

// Compile the regexp for the specified anchoring mode
  pcre* Compile(Anchor anchor);

string        pattern_;
  RE_Options    options_;
  pcre*         re_full_;       // For full matches
  pcre*         re_partial_;    // For partial matches
  const string* error_;         // Error indicator (or points to empty string)
};

}   // namespace pcrecpp

#endif /* _PCRECPP_H */

${this.title}

Code Editor : pcrecpp.h